Author Index

A

  • Abbaspour, M. Application of Boundary Element Method to 3 D Submerged Structures With Open Ends (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 97-104]
  • Abdollahzadeh, M. Allocation of Posts to a Tele-Communication Center Through Kavos (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 73-78]
  • Abedi, M. The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
  • Adami, M. Transient Two-Dimensional (r-z) Cyclic Charging/Discharging Analysis of Space Thermal Energy Storage Systems (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 205-210]
  • Afshar, A. Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
  • Ahmadi, Goodarz Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
  • A. Jeddi, A. A. The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
  • Alamdar Yazdi, A. Evaluation of the Shearing Properties of Woven Fabrics: Rated Force [Volume 15, Issue 4, 2002, Pages 406-416]
  • Alemzadeh, Iran Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
  • Amanifard, Nima Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
  • Amini, J. Kohonen Self Organizing for Automatic Identification of Cartographic Objects [Volume 15, Issue 2, 2002, Pages 109-116]
  • Amirshahi, S. H. Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
  • Asayesh, M. Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
  • Ashrafi, A. A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
  • Assempour, A. Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique [Volume 15, Issue 2, 2002, Pages 167-172]
  • Azadeh, Ali From Theory to Practice: a Total Ergonomics Model of a Manufacturing System [Volume 15, Issue 3, 2002, Pages 257-268]
  • Azaron, A. Dynamic Multi Period Production Planning Problem with Semi Markovian Variable Cost (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 269-274]
  • Azizan, A. Microbial Desulfurization of Malaysian Coal in Batch Process using Mixed Culture (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-234]

B

  • Baghel, K. P. S. Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
  • Bahar, H. B. Engineering Application Of Correlation on Ann Estimated Mass [Volume 15, Issue 2, 2002, Pages 157-166]
  • Baradaran Rahimi, A. A New Approach in Preliminary Design of Closed Loop Solar Thermal Systems (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 383-390]
  • Behzad, M. Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
  • Burrows, R. Head-Driven Simulation of Water Supply Networks [Volume 15, Issue 1, 2002, Pages 11-22]

C

  • Chitizadeh, J. Performance Improvement of Expanded Integrated Local Area Networks (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 141-146]
  • Collier, Michael An Intelligent Computer Interface Utilizing Parallel Picocontrollers (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 367-370]
  • Collier, Michael The Opportunities Afforded by Embedded Computer Systems for Monitoring and Control of Industrial Processes in Less-Industrialised Countries (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 379-384]

D

  • Darvizeh, A. Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
  • Doost Hoseini, A. M. Automatic Bounding Estimation in Modified Nlms Algorithm [Volume 15, Issue 1, 2002, Pages 35-42]
  • Drake, P. R. Network Planning Using Iterative Improvement Methods and Heuristic Techniques [Volume 15, Issue 1, 2002, Pages 63-74]

E

  • Edmonds, D.V. Graphite Phase Formation in Al Alloyed Ductile Irons [Volume 15, Issue 3, 2002, Pages 261-272]
  • Ehsani, M.R. Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
  • Ehsani, N. Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
  • Ekhtiyari, E. The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
  • Eskandari-Ghadi, M. Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]

F

  • Fahimifar, A. Deformational Characteristics of Rocks Containing a Single Discontinuity (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 241-248]
  • Farhanieh, B. Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
  • Farrahi, G. H. Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
  • Farrahi, G. H. Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions [Volume 15, Issue 3, 2002, Pages 287-292]
  • Farzad, A. Effect of Die Profile on Mechanical Properties of Product in Extrusion of Rods [Volume 15, Issue 4, 2002, Pages 365-372]
  • Fatemi Ghomi, S. M. T. A New Approach to Approximate Completion Time Distribution Function of Stochastic Pert Networks [Volume 15, Issue 1, 2002, Pages 53-62]
  • Fereidunian, Alireza Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]

G

  • Ghasemi Tari, F. A Branch and Bound Method for Finding Flow Path Designing of Agv Systems (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 81-90]
  • Ghassemian, Hassan Bit Error Performance for Asynchronous Ds Cdma Systems Over Multipath Rayleigh Fading Channels (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 135-140]
  • Ghazizadeh, R. Performance Improvement of Expanded Integrated Local Area Networks (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 141-146]
  • Ghimire, R. P. Optimization of M G 1 Queue with Vacation (TECHNICAL NOTE) [Volume 15, Issue 2, 2002, Pages 157-160]
  • Ghobadi, Z. Biological Pretreatment of a Beverage Waste Using Yeast Isolated from the Factory Sludge (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 223-226]
  • Ghorbani, Mohammad Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
  • Ghorbanian, K. Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
  • Golozar, M. A. Morphological Characterization of Combustion Deposited Diamond Crystals and Films [Volume 15, Issue 3, 2002, Pages 255-260]

H

  • Habibi Bajguirani, H. R. Morphological Characterization of Combustion Deposited Diamond Crystals and Films [Volume 15, Issue 3, 2002, Pages 255-260]
  • Haese-Coat, V. Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]
  • Haji, Alireza Optimum Aggregate Inventory for Scheduling Multi-product Single Machine System with Zero Setup Time [Volume 15, Issue 1, 2002, Pages 41-48]
  • Haji, Rasoul Optimum Aggregate Inventory for Scheduling Multi-product Single Machine System with Zero Setup Time [Volume 15, Issue 1, 2002, Pages 41-48]
  • Hassani, A. A Numerical Modeling of a Variable Conductance Thermosyphon by Use of a Binary Mixture [Volume 15, Issue 4, 2002, Pages 373-382]
  • Hemayati, M. A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis [Volume 15, Issue 2, 2002, Pages 197-204]
  • Hezarkhani, A. Calculation of Mass Transfer and Element Mobility During the Hydrothermal Alteration in the Sungun PORPHYRY Copper Deposit Iran [Volume 15, Issue 4, 2002, Pages 391-408]
  • HoseinNezhad, Reza A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
  • Hossainpour, A. R. The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
  • Hosseini, S.M. On the Performance of Different Empirical Loss Equations for Flow Through Coarse Porous Media (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 249-254]
  • Hosseinzadeh, M. Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
  • Hu, W. Development of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 339-348]

I

  • Isazadeh, M. A. Thermal Development for Ducts of Arbitrary Cross Sections by Boundary-Fitted Coordinate Transformation Method [Volume 15, Issue 3, 2002, Pages 211-226]

J

  • Jain, Madhu Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
  • Jain, Madhu G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
  • Jain, Madhu Optimization of M G 1 Queue with Vacation (TECHNICAL NOTE) [Volume 15, Issue 2, 2002, Pages 157-160]
  • Jain, Madhu Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]
  • Jain, Madhu M m m Queue with Balking, Reneging and Additional Servers [Volume 15, Issue 2, 2002, Pages 169-178]
  • Jain, Madhu State Dependent Multi channel Queuing System with Ordered Entry [Volume 15, Issue 3, 2002, Pages 275-286]
  • Jain, Madhu M M m K Queue With Additional Servers and Discouragement (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 349-354]
  • Jain, Madhu Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
  • Jajuee, B. Kinetics of Benzyl Chloride Production in a Bench Reactor Under Pressure with Stirrer (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 235-240]
  • Javadpour, J. Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
  • Jenab, K. The Neural Network Modeling Approach for Long Range Expansion Policy of Power Plant Ccenters [Volume 15, Issue 1, 2002, Pages 75-80]
  • Johari, M. The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]

K

  • Kahrizi, M. Bit Error Performance for Asynchronous Ds Cdma Systems Over Multipath Rayleigh Fading Channels (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 135-140]
  • Kania, D. An Efficient Algorithm for Output Coding in Pal Based Cplds (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 325-328]
  • Karami, Ghodratollah A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis [Volume 15, Issue 2, 2002, Pages 197-204]
  • Kasaeyan, M. Application of Boundary Element Method to 3 D Submerged Structures With Open Ends (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 97-104]
  • Kazemzadeh Hannani, S. Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
  • Khoshravan-Azar, Esmaeil Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
  • Kianfar, F. Dynamic Multi Period Production Planning Problem with Semi Markovian Variable Cost (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 269-274]
  • Kianifar, A. A New Approach in Preliminary Design of Closed Loop Solar Thermal Systems (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 383-390]
  • Kiani Rashid, A.R. Graphite Phase Formation in Al Alloyed Ductile Irons [Volume 15, Issue 3, 2002, Pages 261-272]
  • Kianvash, A. Effect of Post-Sintering Annealing Treatment on Magnetic Properties of Some Nd Fe b Based Magnets [Volume 15, Issue 1, 2002, Pages 87-96]
  • Komjani, N. Analysis of Planar Microstrip Circuits Using Three-Dimensional Transmission Line Matrix Method [Volume 15, Issue 2, 2002, Pages 147-156]
  • Konagai, K. Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]
  • Kumar, Alok Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]

L

  • Latifi, M. Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
  • Lee, J. H. S. Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
  • Lesani, H. Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]
  • Liaghat, G. Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
  • Lucas, C. Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]

M

  • Maghsoodi, V. Biological Pretreatment of a Beverage Waste Using Yeast Isolated from the Factory Sludge (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 223-226]
  • Mahdavi, A. Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
  • Majzoobi, G. H. Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions [Volume 15, Issue 3, 2002, Pages 287-292]
  • Makarchian, M. An Experimental Study of Foundation Underpinning by Piles [Volume 15, Issue 1, 2002, Pages 11-22]
  • Mansouri, S. H. The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
  • Marghussian, V.G. Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
  • Masood, S. H. Development of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 339-348]
  • Mazaheri Body, Kiumars Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
  • Mazaheri Body, Kiumars On Line Determination of Optimal Hysteresis Band Amplitudes in Direct Torque Control of Induction Motor Drives [Volume 15, Issue 4, 2002, Pages 329-338]
  • McMahon, C. A. Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
  • Mehrabian, M. A. The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
  • Mir Mohammad Hosseini, S. M. Soil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions [Volume 15, Issue 2, 2002, Pages 117-124]
  • Mirzaee, B. Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
  • Modarres-Yazdi, M. Optimal Solution in a Constrained Distribution System [Volume 15, Issue 2, 2002, Pages 179-190]
  • Moghaddas Tafreshi, S. N. Soil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions [Volume 15, Issue 2, 2002, Pages 117-124]
  • Moghiman, M. Measurements and Modeling of Flue Height Influence on Air Pollution Emissions and Thermal Efficiency of Natural Draught Gas Fired Boilers [Volume 15, Issue 3, 2002, Pages 273-284]
  • Mohammadi, M. An Experimental Investigation of Bridgeflow II Kerb Channel Units [Volume 15, Issue 1, 2002, Pages 23-40]
  • Mohammadian, E. Seismic Response of the Kavar Concrete Face Rockfill Dam (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 333-346]
  • Momayez, A. Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
  • Moshiri, B. A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]

N

  • Najafpour, Ghasem Microbial Desulfurization of Malaysian Coal in Batch Process using Mixed Culture (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-234]
  • Nazaktabar, M. Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
  • Noie, S.H. Kinetics of Benzyl Chloride Production in a Bench Reactor Under Pressure with Stirrer (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 235-240]
  • Noorzad, A. Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]
  • Noorzaie, J. Seismic Response of the Kavar Concrete Face Rockfill Dam (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 333-346]
  • Nouri, M. D. Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
  • Nouri Borujerdi, A. Numerical Evaluation of Hydraulic Fracturing Pressure in a Two-Phase Porous Medium [Volume 15, Issue 2, 2002, Pages 125-134]

O

  • Oloomi Buygi, M. Three New Systematic Approaches for Computing Heffron-Phillips Multi-Machine Model Coefficients (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 43-52]
  • Oloomi Buygi, M. Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]

P

  • Pak, A. Numerical Evaluation of Hydraulic Fracturing Pressure in a Two-Phase Porous Medium [Volume 15, Issue 2, 2002, Pages 125-134]

R

  • Rabbani, Masoud A New Approach to Approximate Completion Time Distribution Function of Stochastic Pert Networks [Volume 15, Issue 1, 2002, Pages 53-62]
  • Rahimzadeh, H. Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
  • Rahmani, A. A. Selective Flocculation for Coal De Mineralization [Volume 15, Issue 2, 2002, Pages 191-203]
  • Rajaie, H. Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
  • Razavi, Seyed Esmaeil Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
  • Razi, S. Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique [Volume 15, Issue 2, 2002, Pages 167-172]
  • Ronsin, J. Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]

S

  • Sadegheih, A. Network Planning Using Iterative Improvement Methods and Heuristic Techniques [Volume 15, Issue 1, 2002, Pages 63-74]
  • Sadeghipour, M. S. Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
  • Sadjadi, S.J. A Trust Region Algorithm for Solving Nonlinear Equations (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 191-196]
  • Sadr Karimi, Jamshid Geotechnical Properties of Lacustrine Carbonate Sediment [Volume 15, Issue 4, 2002, Pages 347-356]
  • Sadrnejad, S. A. Constitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand [Volume 15, Issue 2, 2002, Pages 115-124]
  • Sadrnejad, S. A. Hydraulic Model Studies of Non-Symmetric Y Branches In Karun I (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-244]
  • Sadrnejad, S. A. A Sub Loading Surface Multilaminate Model for Elastic-Plastic Porous Media [Volume 15, Issue 4, 2002, Pages 315-324]
  • Sadrnejad, S. A. Hydrodynamics Induced Vibration to Trash Racks (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 357-368]
  • Saeri, M.R. Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
  • Safabakhsh, R. The Time Adaptive Self Organizing Map for Distribution Estimation [Volume 15, Issue 1, 2002, Pages 23-34]
  • Safekordi, A. A. Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
  • Saidi Mehrabad, Mohammad Application of Markov Processes to the Machine Delays Analysis [Volume 15, Issue 1, 2002, Pages 63-72]
  • Saryazdi, S. Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]
  • Seradjian, M.R. Kohonen Self Organizing for Automatic Identification of Cartographic Objects [Volume 15, Issue 2, 2002, Pages 109-116]
  • Seyed- Hosseini, S.M. The Neural Network Modeling Approach for Long Range Expansion Policy of Power Plant Ccenters [Volume 15, Issue 1, 2002, Pages 75-80]
  • Shah Hosseini, H. The Time Adaptive Self Organizing Map for Distribution Estimation [Volume 15, Issue 1, 2002, Pages 23-34]
  • Shahidehpour, M. Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]
  • Shahtalebi, K. Automatic Bounding Estimation in Modified Nlms Algorithm [Volume 15, Issue 1, 2002, Pages 35-42]
  • Shaikhzadeh Najar, S. The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
  • Shams, M. Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
  • Shams-Nateri, A. Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
  • Shanechi, H. M. Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]
  • Shanechi, M. Three New Systematic Approaches for Computing Heffron-Phillips Multi-Machine Model Coefficients (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 43-52]
  • Sharma, G. C. Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
  • Sharma, G. C. G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
  • Sharma, G. C. Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]
  • Sharma, G. C. M M m K Queue With Additional Servers and Discouragement (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 349-354]
  • Sharma, G. C. Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
  • Sheikhzadeh, G. A. The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
  • Shekhar, C. State Dependent Multi channel Queuing System with Ordered Entry [Volume 15, Issue 3, 2002, Pages 275-286]
  • Shokohmand, H. A Numerical Modeling of a Variable Conductance Thermosyphon by Use of a Binary Mixture [Volume 15, Issue 4, 2002, Pages 373-382]
  • Sibanda, M. The Opportunities Afforded by Embedded Computer Systems for Monitoring and Control of Industrial Processes in Less-Industrialised Countries (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 379-384]
  • Singh, C. J. Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
  • Singh, C. J. G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
  • Singh Pundhir, R. M m m Queue with Balking, Reneging and Additional Servers [Volume 15, Issue 2, 2002, Pages 169-178]
  • Smith, D. J. Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
  • Soleimani, M. Analysis of Planar Microstrip Circuits Using Three-Dimensional Transmission Line Matrix Method [Volume 15, Issue 2, 2002, Pages 147-156]
  • Sorrell, C. C. Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]

T

  • Tabesh, M. Head-Driven Simulation of Water Supply Networks [Volume 15, Issue 1, 2002, Pages 11-22]
  • Taghizadeh Kakhki, H. Allocation of Posts to a Tele-Communication Center Through Kavos (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 73-78]
  • Taimury, E. Optimal Solution in a Constrained Distribution System [Volume 15, Issue 2, 2002, Pages 179-190]
  • Toufigh, Mohammad Mohsen Seepage with Nonlinear Permeability by Least Square FEM [Volume 15, Issue 2, 2002, Pages 125-134]

V

  • Vaez Zadeh, S. On Line Determination of Optimal Hysteresis Band Amplitudes in Direct Torque Control of Induction Motor Drives [Volume 15, Issue 4, 2002, Pages 329-338]
  • Vossoughi, M. Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]

W

  • Wilson, David An Experimental Investigation of Bridgeflow II Kerb Channel Units [Volume 15, Issue 1, 2002, Pages 23-40]

Y

  • Yaghmaei, S. Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
  • Yaghmaei, S. Mathematical Modeling of Natural in Situ Bioremediation to Estimate Initial Contaminant Concentration Effect [Volume 15, Issue 2, 2002, Pages 105-114]

Z

  • Zanjirani Farahani, R. A Branch and Bound Method for Finding Flow Path Designing of Agv Systems (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 81-90]
  • Zhu, W. X. Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]